Skip to main content ↑ ↓
Topic: DOES ANYONE KNOW WERE TO GET PARTS>FOR THE HYD. FAN (Read 1076 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

DOES ANYONE KNOW WERE TO GET PARTS>FOR THE HYD. FAN

Yahoo Message Number: 74710
I need one of the ELE. HYD.vale PARTS.The main one. I was tool $795.00 + $$ to put it in and shipping. I know there has to be a better price out there! Dan 2000 Allure #30498

Re: DOES ANYONE KNOW WERE TO GET PARTS>FOR THE HYD. FAN

Reply #1 –
Yahoo Message Number: 74712
Not sure what a "...ELE. HYD.vale PARTS" is? Is this a hydraulic valve for something? If you can be more specific, we might be able to help.

Larry, 03 Allure, 30856

Re: DOES ANYONE KNOW WERE TO GET PARTS>FOR THE HYD. FAN

Reply #2 –
Yahoo Message Number: 74713
Just rearead your post and noted the title and see it's for the fan.

Larry

Re: DOES ANYONE KNOW WERE TO GET PARTS>FOR THE HYD. FAN

Reply #3 –
Yahoo Message Number: 74714
Dan:

Are you needing the main fan controller?

Kevin Waite
541-953-6162

Re: DOES ANYONE KNOW WERE TO GET PARTS>FOR THE HYD. FAN

Reply #4 –
Yahoo Message Number: 74719
You have a Sauer-Danfoss fan controller and fan system.

Sauer-Danfoss Inc.
2800 East 13th Street
Ames, IA 50010

United States - Map
Phone: 515-239-6000
Fax: 515-239-6318

Website: http://www.sauer-danfoss.com
Not sure what parts you need or your problem, but if you could be a little more specific, maybe we can provide more specific info.

Jim Hughes

2000 Allure #30511

"It always helps to give year, model & number of coach in your post"

Re: DOES ANYONE KNOW WERE TO GET PARTS>FOR THE HYD. FAN

Reply #5 –
Yahoo Message Number: 74739
Dan,

I also have experienced fan controller problems and had to replace the unit. The part number on my old controller unit is: 1090409 and it cost approximately $450.00 plus shipping. The charge to install was approximately $150.00. Before you order the units make sure a qualified mechanic isolates the problem because there are two additional parts that feed information to the fan controller. The first one is the liquid temperature sensor and the second one is the air temperature sensor. These parts are much less costly to replace than the fan controller itself. The liquid temperature part # is 1090173 and the air temperature sensor part # is 1090173. The information on Sauer-Danfoss provided by Jim is correct.

Thanks.

Jon Gullette

2004 Inspire #51008

Re: DOES ANYONE KNOW WERE TO GET PARTS>FOR THE HYD. FAN

Reply #6 –
Yahoo Message Number: 74746
The controller on my coach is #1090307. Make sure whoever you get to install, they have the equipment needed to program the controller.

Jim Hughes

2000 Allure #30511

Re: DOES ANYONE KNOW WERE TO GET PARTS>FOR THE HYD. FAN

Reply #7 –
Yahoo Message Number: 74747
Here's my fan-controller story from a previous post in Feb 2011:
The other day I started the engine cold and was doing some leak checks back there and my fan suddenly went to a high RPM. AC was off, fuse was good, so this didn't seem right for a cold engine. So I crawled under where the fan controller is and started playing with the wires going to the fan controller and the solenoid. The fan went to low RPM when moved the wires a certain way, then back to high RPM when shifting the wires back to the original position. I removed the controller and cleaned all the connectors with some good cleaner and after putting it back together again, the fan stayed at low RPM. A fluke? A coincidence? Who knows, but that's my story and I'm sticking to it!

And it still seems to be working OK today (9/28/2011)

Larry, 03 Allure, 30856

Re: DOES ANYONE KNOW WERE TO GET PARTS>FOR THE HYD. FAN

Reply #8 –
Yahoo Message Number: 74762
From Sauer Danfoss web site,

The liquid temperature sensor part number is 1090173. The air temperature sensor part number is 1090174
Ray

2000 Intrigue 11040
 

Re: DOES ANYONE KNOW WERE TO GET PARTS>FOR THE HYD. FAN

Reply #9 –
Yahoo Message Number: 74765
Just remember the Cummings and CAT systems are different.

Dan 2006 Allure 31348 C-9