Skip to main content ↑ ↓
Topic: 2003 Allure Windshield Washer Resevoir (Read 539 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

2003 Allure Windshield Washer Resevoir

Yahoo Message Number: 75534
I can only fill it up half full because any more than that and it leaks out back down to half full. It seems to be leaking out the back side but I can't tell for sure without taking it off. Does the resevoir have a overflow if filled more than half full? Thanks for your response
 

Re: 2003 Allure Windshield Washer Resevoir

Reply #1 –
Yahoo Message Number: 75536
Tim, you have a crack on the backside of the resevoir, its hard to spot. It's likely caused by the fact CC didn't place rubber gromets between the resevoir and the steel wall. You can purchase a new resevoir from CC original suppler AM EQUIPMENT in Jefferson, Oregon Ph: 541 327-1546. By the way any good hardware store will have the gromets to use, don't tightnen the screws to tight.

I had to replace mine several years ago on my 2003 Allure

Good Luck, Mike 03 Allure 1st Ave. #30898