Skip to main content ↑ ↓
Topic: Brand mfg Concord tv antenna (Read 1530 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Brand mfg Concord tv antenna

Yahoo Message Number: 81510
Hi All

Sitting in Durango Colorado and antenna broken in the wind. All of the plastic on the bottom of the wing is broken and not repairable. Anyone know of a replacement option? It was a great digital antenna and found signal great. Do I need to replace the entire assembly?

Thanks for the help.

David & Paula
07 Allure 470

Re: Brand mfg Concord tv antenna

Reply #1 –
Yahoo Message Number: 81513
Braund Manufacturing is a division of Barker Manufacturing. They are located at" 760 East Michigan Avenue
Battle Creek, MI 49014
269-965-2371

Chack your owner's manual and there is a parts list with part numbers and you should be able to order the needed parts directly from them. The owners manual is also available on line at:
http://www.barkermfg.com/electricantenna.html
Jim Hughes

2000 Allure #30511
 

Re: Brand mfg Concord tv antenna

Reply #2 –
Yahoo Message Number: 81518
I grew weary of replacing the expensive parts of that Concorde antenna.
I have purchased a Jack Antenna, head only, for $59 and have fashioned an attachment to fit to the Concorde antenna legs. This hopefully will provide the raising and rotating function of the old antenna with the less fragile form of the Jack Antenna.
You can also jut buy the Jack with its own rotating stand for about $100. It gets good reviews but is not a powered rotator and requires a new hole in the roof for the controls.

Dean

95 Magna 5280