Skip to main content ↑ ↓
Topic: Synchronization cylinder location (Read 984 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Synchronization cylinder location

Yahoo Message Number: 86291
Can anyone tell me the exact location of the sync cylinder for the passenger side front slide on a 2006 Intrigue Jubilee 530 45' with 4 slides? I need to replace a HWH hose that goes from the solenoid manifold to that sync cylinder.

THANKS

Drew

2006 Intrigue 12066

Re: Synchronization cylinder location

Reply #1 –
Yahoo Message Number: 86338
The synch cylinder for the front slides on my coach are right above the hydro hot unit. The drivers side synch goes front to back and the passenger side synch runs right to left.
I had all my hoses replaced at premier RV in junction city as well as having the rear synch moved away from the turbos.

Mark and Helen Surber
07 intrigue 530 45' 12162
C13 cat Allison

Thank You

Mark Surber

Synchronization cylinder location

Reply #2 –
Yahoo Message Number: 86298
There should be one located in the tag axle fender well passenger look for the hoses it is mounted behind the protection plate. Hope this helps..

Regards,
Dave

Dave Rousey Jr.

Former CC Technician
Styleworks RV Repair &
Bus Restoration LLC
4762 Long St.
Sweet Home, OR
(541) 543-7983
daverjr4@...

Re: Synchronization cylinder location

Reply #4 –
Yahoo Message Number: 86314
Maybe I am missing something but the line that goes from my pump manifold to the sync cylinder is 26ft long per HWH as per the part number on the hose end at the pump manifold. My coach is 45' long. Does that hose from the manifold go someplace else first that is a shorter run. Also, my understanding is that from that sync cylinder is a hose to the 2 operating cylinders that are at each end of the slide and must be equal length to each other. Why would the sync cylinder be several feet past the far end of the slide and then there be a short distance fro. The sync cylinder to one of the operation cylinders and a way longer distance all the way back to the front of that forward passenger side slide? It would be great to see a schematic of the HWH slide system with the location of all cylinders but have had no luck finding one. I only have 2 weekends before leaving for Key Largo and must get this figured out and the proper parts ordered. Does anyone know of a hydraulic or coach company that they would recommend for exactly this type of work.
Thanks

Drew

2006 Intrigue 45' 12066

Re: Synchronization cylinder location

Reply #5 –
Yahoo Message Number: 86315
Sorry, didn't finish the post. I am looking for help and or a referral to someone close to Virginia Beach, VA.
 

Re: Synchronization cylinder location

Reply #6 –
Yahoo Message Number: 86316
If you called Doug Beaudry at Country Coach Corp, he knows all about these details and could explain/talk you through it.

Lee
--

Lee (leozbrowski@...) 2007 Country Coach Intrigue 12153
CAT C-13