Skip to main content ↑ ↓
Topic: Entry Step Controller (Read 636 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Entry Step Controller

Yahoo Message Number: 92701
Quote
Quote
My entry step does not move. I have not finished trouble shooting, but does anyone know if the magnetic switch in the door is in the closed or open position when the door is closed? Also does it pass 12 v or grnd? Any trouble shooting ideas are welcome. TIA
Quote
Dave, 96 CC Intrique

Re: Entry Step Controller

Reply #1 –
Yahoo Message Number: 92703
We have a 98 Intrigue, switch is not magnetic, standard switch. Original switch was a NC (open when the door is closed). When I replaced the controlled Kwikee included a relay to change the switch input to a NO because they changed the controller. A NC switch is not that easy ti find so when i replaced the switch I replaced it with a SPDT snd used the NC contacts. If the relay evr goes "kaput" I'll use the NO side of the switch and remove the relay.

Judy n Joe 98 Intrigue 10578