Skip to main content ↑ ↓
Topic: male snaps for window screens and aquahot fan motors (Read 665 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

male snaps for window screens and aquahot fan motors

Yahoo Message Number: 93542
I used the shade and one of the snaps came off the front cap. It was held by a small screw that just pulled out. Does anyone have a better way of attaching the male snap? Also some of the fans for the aqua hot make various noises like the bearings are getting dry. Has anyone opened these up?

Rod

Re: male snaps for window screens and aquahot fan motors

Reply #2 –
Yahoo Message Number: 93546
Roger Berke on the http://www.rvhydronicheaterrepair.com/ site has replacement fans and assemblies. When we replaced ours I don't think it was the bearings. It was poor design. We replaced the fan assembly in the bedroom with 2 muffin fans (one assembly). The fans are nosier but the bit of extra noise doesn't bother us.
Lonny & Diane Livingston
'04 Allure #31065

Re: male snaps for window screens and aquahot fan motors

Reply #3 –
Yahoo Message Number: 93549
Rod,


I have replaced several of the male snaps for my screens. I found replacement at a local upholstery shop. What is needed is to drill the center of the snap using a small drill bit and that will release the snap. The replacement has a screw threads that you used to reattach the new male snap. Very simple to do. If for some reason you cannot find one let me know as I have several.


Jock Vargo

2005 Inspire
51428
 

Re: male snaps for window screens and aquahot fan motors

Reply #4 –
Yahoo Message Number: 93551
What MCD does is snap with bigger stainless screw. When I bought ours they came with two oversize snaps. When I needed more tried to order from MCD but they just sent them no charge.

[size=75%]Sent via the Samsung Galaxy S™II Skyrocket™ an AT&T 4G LTE smartphone.[/size]
Rod wrote:

I used the shade and one of the snaps came off the front cap. It was held by a small screw that just pulled out. Does anyone have a better way of attaching the male snap? Also some of the fans for the aqua hot make various noises like the bearings are getting dry. Has anyone opened these up? Rod