Skip to main content ↑ ↓
Topic: Wire Path for Hydraulic Motor Fan Switch (Read 722 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Wire Path for Hydraulic Motor Fan Switch

Yahoo Message Number: 94718
For those of you that have installed a switch in the cockpit to control the hydraulic fan motor at the radiator, how did you route and conceal the wires from the chassis fuse box to below the dashboard above. I'm hoping there's an easy route or spare wires in one of the looms.

Secondly, my water temperature sending unit for the fan controller has made contact with the CAC piping for the second time in the life of my coach. Could someone with a 2003 vintage Intrigue take a picture from the engine access door showing how their's is positioned. Why the 3/8" weld-o-let was not installed at a right angle to the way it is is beyond me. Has anyone else had this problem and if so, how did you correct the clearance issue?

Thanking you in advance!

Rick Breedlove

2003 Intrigue Suite Sensation
400ISL

Coach 11518
 

Re: Wire Path for Hydraulic Motor Fan Switch

Reply #1 –
Yahoo Message Number: 94723
On my Intrigue, I ran the wire directly down from the control, panel to the left of the driver. A hole in the bottom leads directly to the bay with the fuses in it.

Roger Harper
2007 Affinity
#6740