Skip to main content ↑ ↓
Topic: awning (Read 660 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

awning

Yahoo Message Number: 102237
A heavy gust of wind has loosen one of the bolts holding the awning to the side of our coach.I am thinking of 2 ways to fix it. 1 Use a bigger bolt and 2. drive a wood plug into the existing hole and using the same screw.  This awning also will not roll up completely.  It stops rolling about 6" from the top.  How do I get it to roll tighter? Tom

2005 Inspire 51177
 

Re: awning

Reply #1 –
Yahoo Message Number: 102238
No matter how you do it - you must be sure the hole is completely sealed - otherwise-  water could find its way into the vacu- bonded wall, soak into the lauan board and cause the fiberglass to start separating - delaminating.

Vince

02 Intrigue #11332