Skip to main content ↑ ↓
Topic: slide out adjustments? (Read 820 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

slide out adjustments?

Yahoo Message Number: 103499
The slide out needs some correction in the alignment. The upper left corner hits the stationary wall whenever the slide comes in and it's delaminating the slide out. The upper right corner, you can put your thumb inside. It needs rotated clockwise app. 1/4-3/8 of an inch. Any help would be appreciated. I can send some photos if that would be helpful.

Roy Smith
Bremen, GA

1998 Country Coach Allure 30195

Re: slide out adjustments?

Reply #1 –
Yahoo Message Number: 103503
Roy,

If you have a hydraulic slide, it sounds like the synchronizing cylinder may be going south. Does your fluid level check OK? Any leaks in the system? If so, it's very likely it's not something you can fix at home.?
 

Re: slide out adjustments?

Reply #2 –
Yahoo Message Number: 103522
Thanks, Dave

I do have some leakage, but it's very minimal. I will look into your suggestion.

I'm afraid that it's starting to show it's age, but I'll check it out.

Roy

CC#30195