Skip to main content ↑ ↓
Topic: Pac brake not working. (Read 1389 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Pac brake not working.

Yahoo Message Number: 106923
Morning all. Last trip out our pac brake wasn't working. I don't think it is a mechanical issue but electrical. When I turn in the switch the light on the dash doesn't come on either. I have the schematics and want to know if anyone knows where the inline fuse would be? They show a fuse inline to the actuator not the switch. We have a 2000 CC Allure. Thanks.

Re: Pac brake not working.

Reply #1 –
Yahoo Message Number: 106926
I hate to keep drumming on this, but you don't have a floor mat holding the accelerator or the brake pedal open do you? Either one will put your PAC brake to sleep!!
 

Re: Pac brake not working.

Reply #2 –
Yahoo Message Number: 106954
The fuse is located in the under dash fuse box on drivers side, should be 2 fuse panels and is located in bottom panel. It is 20 amp and is shared with ac compressor control. works through a relay to supply pac-brake and ac compressor. If you are able to engage ac compressor clutch with ac controls the fuse is good.

David White 00 Allure 30349