Skip to main content ↑ ↓
Topic: Water pump control (Read 1231 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Water pump control

Yahoo Message Number: 107328
The Intellitec controls in my 08 Affinity have quit controlling the water pump down below. The manual override in the plumbing bay still works but the indicator light on it stays on all the time now. I suspect that the Intellitec relay board in the electric bay is the root of the problem. My electrical schematics do not show this pump system. Does anyone have a set that does? Any ideas what might be causing the problem?

Terry Ray

08 Affinity 6837

Re: Water pump control

Reply #1 –
Yahoo Message Number: 107334
Terry,

There are fuses in the Intellitec controllers so if you can find the correct controller you may find a blown fuse.

Barney

07 Inspire 52059

---In Country-Coach-Owners@yahoogroups.com,  wrote :

The Intellitec controls in my 08 Affinity have quit controlling the water pump down below. The manual override in the plumbing bay still works but the indicator light on it stays on all the time now. I suspect that the Intellitec relay board in the electric bay is the root of the problem. My electrical schematics do not show this pump system. Does anyone have a set that does? Any ideas what might be causing the problem?

Terry Ray

08 Affinity 6837
 

Re: Water pump control

Reply #2 –
Yahoo Message Number: 107344
I do not find a fused controller for the water pump. The only fuse for the water pump is in the mid coach fuse block. I find a relay controller in the electrical bay. I assume all three leads from the intellitec switches throughout the coach come together at that point. The relay then parallels the mechanical switch found in the plumbing bay.

Terry Ray

08 Affinity 6837