Skip to main content ↑ ↓
Topic: slide hydraulic ( hoses ) failures (Read 1413 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

slide hydraulic ( hoses ) failures

Yahoo Message Number: 108919
2008 intrigue blowing out the hoses for the slides many times. I am now working on a cure, since the factory will not help, even though I had them change all of the hoses........

Re: slide hydraulic ( hoses ) failures

Reply #1 –
Yahoo Message Number: 108924
If your hoses a blowing have a reputable hydraulic shop check your high pressure bypass valve, I have had that problem too

Robert Mcclernon
2000 intrigue
Robert McClernon
2000 Intrigue
40 one slide cummins 375

Re: slide hydraulic ( hoses ) failures

Reply #2 –
Yahoo Message Number: 108925
I would go see the guys at HWH in Moscow Iowa, they will find the solution, Guaranteed. TWI 2004 Intrigue 11731

Re: slide hydraulic ( hoses ) failures

Reply #3 –
Yahoo Message Number: 108930
I had hoses burst on my 06 Intrigue a couple of times. Both times was on the right rear. I took it to OMC and they installed a heat shield. It solved the problem.

Dan
SOB
 

Re: slide hydraulic ( hoses ) failures

Reply #4 –
Yahoo Message Number: 108946
I assume the heat shield went in front of the sync cylinder between the the cylinder and right tag tire. My 07 came with the shield. That was a DIY I did some years ago, I drilled a 100 vent holes in the shield. I'm assuming the hose failure was at the sync cylinder.

Lee (leozbrowski@...) VP Publications, CCI

2007 Country Coach Intrigue 12153
CAT C-13