Skip to main content ↑ ↓
Topic: Sparking Sharp Convection/Microwave Oven (Read 1420 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Re: Sparking Sharp Convection/Microwave Oven

Reply #1 –
Yahoo Message Number: 109166
Rich,

Sounds like you put something in there that you should have. If you place a coffee cup with gold around the lip (or anywhere else for that matter) this will light up the inside of the microwave like the fourth of July. This can damage the microwave. It's best not to put anything containing any kind of metal inside the micro. Try putting a glass measuring cup with water in it and see if it heats up. If so you are good to go.

Barney

07 Inspire 52059

---In Country-Coach-Owners@yahoogroups.com,  wrote :

left

left

left

Re: Sparking Sharp Convection/Microwave Oven

Reply #2 –
Yahoo Message Number: 109167
The first sentence should have read, "Sounds like you put something in there that you should NOT have"

---In Country-Coach-Owners@yahoogroups.com,  wrote :

Rich,

Sounds like you put something in there that you should have. If you place a coffee cup with gold around the lip (or anywhere else for that matter) this will light up the inside of the microwave like the fourth of July. This can damage the microwave. It's best not to put anything containing any kind of metal inside the micro. Try putting a glass measuring cup with water in it and see if it heats up. If so you are good to go.

Barney

07 Inspire 52059

---In Country-Coach-Owners@yahoogroups.com,  wrote :

left

left

left

Re: Sparking Sharp Convection/Microwave Oven

Reply #3 –
Yahoo Message Number: 109168
There are two different trays you can put in the convection ovens, the glass tray or the metal one. The metal one is for the oven and the glass one is for microwave! Be sure you have the glass tray in!

Dennis

Re: Sparking Sharp Convection/Microwave Oven

Reply #4 –
Yahoo Message Number: 109173
Rich, we had a similar type incident as you, but it was sporadic. We determined that the rotating wire part that the glass plate sits on, was what was causing the arching. We purchased another one base on our model # and so far no more arcing.

Dave

Dave & Jodi
2007 CC Allure 40’ Tag #31495
2012 Jeep GC
Big Bear Lake, Ca & Henderson, Nev