Skip to main content ↑ ↓
Topic: Door Lock with Dead Bolt and Key Fob (Read 669 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Door Lock with Dead Bolt and Key Fob

Yahoo Message Number: 112207
I have a 2006 Inspire and starting to have a problem with opening the door. I have used spray, some good stuff and it lasts for a while then hard to open door.
I removed the 3 screws and tried to remove the inside handle to get to the 5 digit code but can't remove because of a spring and I can't get to it. Don't want to mess up the lock using the key fob.
So has anyone remove there door lock and replaced with a new Door Lock?
Here is what I want to replace it with, any help would be great.
https://www.prvparts.com/product-p/30-900.htm

Floyd 2006 Inspire 51744

Re: Door Lock with Dead Bolt and Key Fob

Reply #1 –
Yahoo Message Number: 112208
I'd look at shimming the door from bottom. Bet has slipped. Common problem had same problem with my 06 Magna
2006 Magna 6622
Gary Glenn
ServiceMaster by A-Town / Hi-Tech
325-665-4993

 

Re: Door Lock with Dead Bolt and Key Fob

Reply #2 –
Yahoo Message Number: 112209
Gary
No, my problem is even when the door is open and try and just move the door handle it will snap and pop. Thanks for reply.
Floyd 2006 Inspire 51744