Skip to main content ↑ ↓
Topic: electrical problem 1 leg dead and only showing... (Read 740 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

electrical problem 1 leg dead and only showing...

Yahoo Message Number: 112690

What is the voltage across L1 and L2... It should be 240. If it is 0 both legs are on the same phase and the coach thinks it does not have 50 amps.

If so make the owner of the campground aware get it fixed or change sites.

Mikee

Re: electrical problem re: 1 leg dead and only showing...

Reply #1 –
Yahoo Message Number: 112692
it is showing 121 on one and 124 on the other, but only 1 has amperage showing use.

Laura Lewis

Winter Park Chateau
405 Lions Gate Drive
Winter Park, CO 80482-0798
WWW.WinterParkChateau.com
970-726-2884

Re: electrical problem re: 1 leg dead and only showing...

Reply #2 –
Yahoo Message Number: 112693

What is the voltage across L1 And L2 it should be 240. That is the only way to determine if you are on real 50 amp service, as opposed to a fake 50 amp.

Mikee

Re: electrical problem re: 1 leg dead and only showing...

Reply #3 –
Yahoo Message Number: 112694
When you measure between the logs what do you get? If working properly it should be about 245 with your individual measurements.

Ray

They say wine improves with age! As I enter my golden years, I say age improves with wine! The Born Loser

 

Re: electrical problem re: 1 leg dead and only showing...

Reply #4 –
Yahoo Message Number: 112713

The OP stated they had voltage on both legs. This pretty much eliminates what you are talking about.

Mikee