Skip to main content ↑ ↓
Topic: Instrument panel power loss (Read 732 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Instrument panel power loss

Yahoo Message Number: 112696
Hi Folks.......

Yesterday I decided to replace the little wedge based bulbs in the 16 'idiot' lights with LED's because half of them were burned out. When I finished, I turned on the ignition switch to make sure they all worked during the brief self check cycle.
Nothing happened. No 'idiot' lights and now, also, no speedo, tach, Tire Pressure monitor or SilverLeaf display.
I've scanned the Dash harness schematics but cannot find where this stuff is powered from. The analog gauges and their lights all work OK as do the windshield wipers, fans, eyebrow lighting, rear view monitor, etc.
I've checked to see if I might have knocked something loose, but have found nothing. No loose connections either.
I'm at a standstill. Has anyone ever dealt with this issue?


Dave Trotter
01 Intrigue 11215

Re: Instrument panel power loss

Reply #1 –
Yahoo Message Number: 112699
Could you have plugged them in backwards? LED's are polarity sensitive.

Ray

They say wine improves with age! As I enter my golden years, I say age improves with wine! The Born Loser

Re: Instrument panel power loss

Reply #2 –
Yahoo Message Number: 112702

Even if that were true, it should not knock out power to all the other accessories.

Inline image 2

 

Re: Instrument panel power loss

Reply #4 –
Yahoo Message Number: 112712

A lot of leds are polarity sensitive., try reversing the bulbs and see if they come on.

Mikee