Skip to main content ↑ ↓
Topic: Setting code for key pad (Read 1238 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Setting code for key pad

Yahoo Message Number: 12622
In order to set your user access code you need to first reset the Authority code to something unique to your coach.
Reset keypad:
1. In 1st DS bay locate the Tri-Mark e-ASK control board and the red button on the end of a wire. Push the button to reset board.
2. Hold the 9/0 button for 10 seconds until keypad beeps.
3. Hold 5/6 button for 5 seconds and release after you hear beep
4. Push button 1/2 twice; 5/6 once; 9/0 twice
5. Enter YOUR new 5 digit authority code. Keypad will beep confirmation.
6. Re-enter the new 5 digit authority code. Keypad will confirm with beeps and exit learn mode with your new authority code in place.
NOTE: Until you establish your own authority code, anyone who knows the master code can change your personal access code and enter your coach.

Now you can assign up to 5 new different access codes.
1. Press the 5/6 button for 5 seconds and release after you hear the beep.
2. Enter your AUTHORITY code assigned above. Keypad will beep.
3. Press the button that will correspond to this access code (use 1/2 for first code, 3/4 for second and so forth). Keypad will issue confirmation beep.
4. Enter your new 5 digit ACCESS code to be assigned to this number.
Keypad will beep.
5. RE-enter the access code. Keypad will beep and exit learn mode.
6. If you want additional access codes just re-enter the learn mode
by holding 5/6 button for 5 seconds until it beeps.

Note: for those a bit hard of hearing in the high range (myself), get your significant other to listen for the beeps or this job will drive you up the wall.

Alan Hann 2005 Affinity 6442
 

Re: Setting code for key pad

Reply #2 –
Yahoo Message Number: 12635
Quote from: alanhann
In order to set your user access code you need to first reset the > Authority code to something unique to your coach.
Reset keypad:

1. In 1st DS bay locate the Tri-Mark e-ASK control board and the

red

Quote
button on the end of a wire. Push the button to reset board.
2. Hold the 9/0 button for 10 seconds until keypad beeps.
3. Hold 5/6 button for 5 seconds and release after you hear beep > 4. Push button 1/2 twice; 5/6 once; 9/0 twice > 5. Enter YOUR new 5 digit authority code. Keypad will beep > confirmation.

6. Re-enter the new 5 digit authority code. Keypad will confirm

with

Quote
beeps and exit learn mode with your new authority code in place.
NOTE: Until you establish your own authority code, anyone who knows > the master code can change your personal access code and enter your > coach.

Now you can assign up to 5 new different access codes.
1. Press the 5/6 button for 5 seconds and release after you hear

the

Quote
beep.

2. Enter your AUTHORITY code assigned above. Keypad will beep.
3. Press the button that will correspond to this access code (use > 1/2 for first code, 3/4 for second and so forth). Keypad will issue > confirmation beep.

4. Enter your new 5 digit ACCESS code to be assigned to this

number.

Quote
Keypad will beep.

5. RE-enter the access code. Keypad will beep and exit learn mode.
6. If you want additional access codes just re-enter the learn mode > by holding 5/6 button for 5 seconds until it beeps.

Note: for those a bit hard of hearing in the high range (myself), > get your significant other to listen for the beeps or this job will > drive you up the wall.

Alan Hann 2005 Affinity 6442
Thanks from me also. Got mine working by using the default code that CC uses ... they change it from the original so I dumped my message.
Your info is more detailed and valuable. I called the TriMark factory for this also, but Lazy Days called back while I was on the phone so I never got this far.

Now I just have to get the vault open ... the factory default does not work here either.
John