Skip to main content ↑ ↓
Topic: screen rubber gaskets (Read 704 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

screen rubber gaskets

Yahoo Message Number: 15019
On all screens theres a rubber strip that slide against window to keep it sealed- As you run the window open and shut the rubber on the screen begins to come out so you press it back in with your finger-

Question- Has any one come up with a way to keep these rubber seal where they belong?

Stan & Joni

#11556 Intrigue 03
Fulltiming

Casa Grande, AZ
 

Re: screen rubber gaskets

Reply #1 –
Yahoo Message Number: 15022
There are some glues, used in the auto industry to hold weatherstripping in place, that will work fine. They are available at auto supply stores, such as NAPA. It works very well to hold rubber to metal. Use a toothpick to apply.. and go very light. Not much is needed.

Hope this helps,

Russ and Jean
05 Intrigue LE
11883

Quote from: stanley20002152
>

On all screens theres a rubber strip that slide against window to > keep it sealed- As you run the window open and shut the rubber on

the