Skip to main content ↑ ↓
Topic: Awning billowing out (Read 794 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Awning billowing out

Yahoo Message Number: 17310
Does ANYONE have the name / address etc, of the company that makes the polished SST "angles" that are installed UNDER the slideout awnings to keep the wind from billowing them out during travel? I HAVE the pic files...but cant find a name and adress / phone number etc.

Mucho Thanks!

Re: Awning billowing out

Reply #1 –
Yahoo Message Number: 17311
Hi, if you look on the Yhoo group site for CC and go to Database and then to Service Centers. The company is Standley Mfg in Juncton City. Good Luck, Dale Hollick 05 Affintiy #6370

Re: Awning billowing out

Reply #2 –
Yahoo Message Number: 17313
Quote from: Candace and Dale Hollick\[br\
] > Hi, if you look on the Yhoo group site for CC and go to Database and
then to Service Centers. The company is Standley Mfg in Juncton City.
Good Luck, Dale Hollick 05 Affintiy #6370

Got it! Thanks Heaps partner!!

Re: Awning billowing out

Reply #3 –
Yahoo Message Number: 17327
Quote from: rvman4u
Does ANYONE have the name / address etc, of the company that makes

the

Quote
polished SST "angles" that are installed UNDER the slideout awnings

to

Quote
keep the wind from billowing them out during travel? I HAVE the pic > files...but cant find a name and adress / phone number etc.

Mucho Thanks!
Architectural Stainless Design Tucson Az 520-574-2961

Worth evey penny. I just installed two on my coach.

Re: Awning billowing out

Reply #5 –
Yahoo Message Number: 17340
Herb, you don't get enough recognition for the job you do as our moderator. From Texarkana, USA here's a big thanks for your time and effort on our behalf.

Walt Rothermel
03Allure30811

Re: Awning billowing out

Reply #6 –
Yahoo Message Number: 17348
We'll second that. Herb is a great moderator, takes very good care of our Yahoo site on behalf of all of the owners. We appreciate you! Dale and Candace Hollick 05 Affinity #6370

Re: Awning billowing out

Reply #7 –
Yahoo Message Number: 17376

I purchase the stainless fix kit but couldn't bring myself to attach them. Plan B how does this happen? What I found in my case a 1/8 inch play between the vertical arms and the safety pull down clips.
I shim ed out the vertical arm at the clip so there is no play. I haven't tried the real test (going through OK) but have been in some high knot winds. Just a though. When I get through OK I may have some stainless for sale.

Don #11305 intrigue/tornado
 

Re: Awning billowing out

Reply #8 –
Yahoo Message Number: 17381
Don,

Have you checked to make sure your awning(s) have the proper spring preload. Mine were way under wound. Since adjusting them to the proper spring preload, I have had no problems and I travel I-40 through OK, TX & NM regularly. Zip-Dee can provide the proper preload specs.

Hope this helps.............
Steve

Intrigue #10673

Quote
I purchase the stainless fix kit but couldn't bring myself to attach
them. Plan B how does this happen?
Quote
What I found in my case a 1/8 inch play between the vertical arms
and the safety pull down clips.

Quote
I shim ed out the vertical arm at the clip so there is no play. I
haven't tried the real test (going through OK) but have been in some high knot winds. Just a though. When I get through OK I may have some stainless for sale.