Skip to main content ↑ ↓
Topic: A new cabinet maker near Junction City (Read 797 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

A new cabinet maker near Junction City

Yahoo Message Number: 23871
Finding both Shaun Davis at Davis Cabinets and Scott Adams, cabinetmaker, in Monroe booked up until October and September, respectively we found an alternative. I had a chance encounter with Luke Adams who, with his brother Chuck (no relation to the aforementioned Scott Adams), have formed Mid-Valley Custom Cabinets.
They are located at the intersection of Link and Awbrey Roads, just east of Hiway 99 opposite the Eugene Airport and about 7 miles South of Junction City.

Their business is but 2-3 months old, but already they have a contract to custom finish 10 Country Coaches being delivered to a Texas buyer.
Chuck brings to his new business 8 or 10 years of RV cabinet work at Davis. Their shop is very well equipped with the latest in equipment and stocked with a variety of Cherry, Oak and Maple.
We had two projects done by Mid-Valley. The first was to install two matching cabinet doors to the space above our Splendide washer/dryer where our flying TV set ripped out as we rounded a highway curve.
That's another whole story. The doors match exactly the raised panel style in our '04 Allure Pendleton. Not being TV watchers (a vast wasteland, you know), we've converted the space to significant new storage.

The second project, probably unique to '04 Allures, was to build a cabinet for storage of the Corian sink covers and stove cover. In that year, CC chose to NOT install storage space for these under the stove. So we always had no place to put these big flat heavy things when we were using the galley. Mid-Valley designed a cabinet which fits just forward of the galley cupboards and between the cupboards and the large bay-window on the passenger side. Made of natural cherry to match our other cabinets, the new cabinet can store the Corian covers on edge, as well as store the recently purchased Davis folding table.

I purchased drawer pulls which match our existing from CC parts department.

Overall, we are very pleased with the work done at a very reasonable price and within one week's time from date of order to completion of installation. We went over to the coast and hung out at Outdoor Resorts for almost a week, while they were doing the fabrication. We returned for installation which took only a couple of hours. They have space, 110vAC power and water available for overnight parking.

For reference:

Chuck Adams

Mid Valley Cabinet Concepts
541-953-5820 (cell)

We can heartily recommend their workmanship.

Joe & Carole On-The-Road at San Juan Is., WA '04 Allure 36' #31031