Skip to main content ↑ ↓
Topic: Programming for the Sharp Aquos TV (Read 548 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Programming for the Sharp Aquos TV

Yahoo Message Number: 26087
Hi All,

Here is the information to program the Sharp Aquos TV"s for cable. This was provided by one of the CC Techs. He programmed our TV's and it worked very well as we were able to get all 70 channels on cable while parked in JC on 6th street.
Hollicks 07 Affinity 6767

Sharp LC-37D5U Quick Set-up
During this operation use the TV remote to complete the programming.

TV Guide Set-up
  • Select TV Guide
  • Scroll to set up ? then press enter
  • Select Country - then press enter
  • Insert Zip Code ? then press enter
  • Select Antenna ? then press enter
  • Verify Settings ? then press enter
  • Follow directions on Screen
Channel Programming
  • On cable selector switch select Main TV ? Ant
  • Turn TV on
  • Use Input button to select TV
  • Press Menu
  • Scroll across to Setup
  • Scroll down to EZ Setup ? then press enter
  • Select Language ? then press enter
  • Select Analog ? Air ? then press enter
  • Select (Analog ? yes) (Digital Air ? yes) (Digital Cable - No)
  • Select Search Start ? then press enter
The TV will start auto programming all available off air channels.
Note: The above operation is for programming the TV with Antenna selected on the Coax switcher. If the coach is connected to cable the selector switch must be changed to Main TV ? Cable and you must go back to the TV Guide set up screen and change to cable before you can use the EZ Set up to auto program cable channels.