Skip to main content ↑ ↓
Topic: Location of Cummins ISC Engine Transducers (Read 1159 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Location of Cummins ISC Engine Transducers

Yahoo Message Number: 2155
Coach Owners,

There are 2 groups of transducers: CC use only and those that are connected to the engine ECM (data displayed on Silverleaf products). re: foldout schematic #S0699.

CC: temperature sender wire #39 red - left side of valve cover behind pulleys

oil pressure sensor wire #36 yel - above starter oil pressure switch wire #24A blue - above starter oil pressure switch wire #gnd green - above starter note: the 'ops' wires have inline lugs as the wires to the switch are screwed on.

IC connector to ECM - above sensor and switch Cummins transducers:

Most of these transducers are on the same side of the engine as the 2 CC oil transducers. They have black wires using General Motors type connectors to the transducer. I will be discussing their type and use by the ecm with Cummins engineering and will report my findings to the group.
Fred Kovol

Yahoo! - Official partner of 2002 FIFA World Cup http://fifaworldcup.yahoo.com