Skip to main content ↑ ↓
Topic: air filter 2006 affinity isx600 (Read 588 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

air filter 2006 affinity isx600

Yahoo Message Number: 57429
does anyone have a part number for the air filter....its hard to read what is etched on the steel ring, but looks like nelson 7n-155.....cant find a cross ref....thanks Luther Wikle 2006 affinity isx600

Re: air filter 2006 affinity isx600

Reply #2 –
Yahoo Message Number: 57449
The part number for the air filter is 70337N which is used on my 07 Magna.

John Bennett

Re: air filter 2006 affinity isx600

Reply #4 –
Yahoo Message Number: 57500
Hey Luther,

Just curious, are you looking to replace it?

Jim Myers

2006 Magna 6653

Re: air filter 2006 affinity isx600

Reply #6 –
Yahoo Message Number: 57553
I was going to do the same thing last fall. I bought the filter and was ready to put it in when a mechanic asked how many miles were on the coach and what was the filter vacuum indicator showing. I had about 25,000 miles and the filter indicator was still at the bottom. Since dirt is the nemesis of a diesel engine, and the process of changing the filter poses a risk of getting dirt into the engine, I've decided to wait on changing it until there was something telling me it was time. As a result, I'm carrying a big box in one of my bays.
If you decide to go ahead and change it (or carry a spare like me), Rod Marshall at Rhen Marshall in Beatrice, NE is a good source.

Jim Myers

2006 Magna 6652
Cummins ISX

Re: air filter 2006 affinity isx600

Reply #7 –
Yahoo Message Number: 57592
thanks for the info Jim.....we are pushing 40000, and even though the indicator says it ok, its time to replace it, along with all the other filters....
 

Re: air filter 2006 affinity isx600

Reply #8 –
Yahoo Message Number: 57614
As a retired Cat service teck Please let me warn you about Air Filter Indicators! Do not Ever Believe them I do not want to tell you how many Failures both Indicator and Major Engine Failures I have seen through the Years. I have seen the rubber hose at the Indicator or the inlet side of Air filter tubing, I have seen them stuck! Do your engine a Favor Remove your filter or have it inspected by a Certified Factory or ASE Diesel Teck also have the Ind. and tubing tested. On my Allure I change the filter out every other year! Just removed mine and only put about 10k miles use and it was Plugged and the metal base was starting to rust and this was only in two years! I drive as little as possable in the rain also. Another Question on My 330 ISC Has anyone had their fuel raised to like 350 or 375 hp? A friend says the Allison MD 3060 can saftly handle 350 hp. As a Cat. teck we with Cats Permission from tome to time would turn up the Fuel setting to Satisfy a Cust need. CC did a great job sizeing Coolers and Inlet/Exhaust piping on my 99 Allure I feel. Any help on this would be nice. The Cummins shop here in Yuma said they can do this for around 100$ Thanks Ken S/N 33056