Skip to main content ↑ ↓
Topic: xantrex LEDs (Read 514 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

xantrex LEDs

Yahoo Message Number: 61929
?
Just went to check on my MH in storage as I haven't for a month. The 20amp breaker to the shore power was tripped and batteries were nearly completely dead. Couldn't jump the batteries with the boost switch and start the Generator. I reset the breaker and when the transfer switch kicked in the Xantrex LEDs were flashing like a Christmas tree. The Battery Charger was working as I could see a 18 amp load on the leg it works on but all the lights on the remote were just strobing except for the fault light and it was off . I started the Generator after about 30 mins. and boosted the chassis batts and it started right up. So I brought it home so I could work on it.
There has been several lighting storms in the area since I put it in storage and it's been averaging around 100 degs. for the last two weeks here in Tulsa, OK.
I didn't see any faults in the manual that resembled mine so I thought I would start by disconnecting the battery cables for a minute and see if that has any effect.
Any ideas or advice out there?
Kevin Burns

00 Affinity #5865