Skip to main content ↑ ↓
Topic: Loose Steering Column Support Bolts (Read 1072 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Loose Steering Column Support Bolts

Yahoo Message Number: 4640
Hi Folks,

I was looking for a good spot to mount a brake control assembly and decided on using one of the bolts that secure the steering column to the support bracket. There are 4 shinny bolts with 9/16" heads - two on each side of the steering column support bracket. When I went to unlossen the bolts, I found them about finger tight. All have flat washers on both ends of each bolt and lock washers on the nut end.

Fred Kovol

2000 Allure 30593
 

Re: Loose Steering Column Support Bolts

Reply #1 –
Yahoo Message Number: 4641
Lucky you, Fred, on the loose Bolts. Hopefully Somebody from CC qualilty Control is reading these messages.........
Lee '01 Intrigue, #11219, with Tight Steering Bolts ! ! ! ! "fredkovol" fredkovol@...> wrote: