Skip to main content ↑ ↓
Topic: Vanity light globes - break upon impact with sink:)! (Read 508 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Vanity light globes - break upon impact with sink:)!

Yahoo Message Number: 64572
Live and learn. Pulling into Anaconda, MT on our recent trip. One of the three glass globes/shades on the vanity. Vibrated off and broke upon impact with the sink. This was the frost glass piece, and I've had no luck finding replacements at the local shops.

Any suggestions on where to check?
The learn part, is that they can vibrate loose. I'm adding teflon tape to the threads, for a bit tighter fit. Hope that will help...
Thanks,
Smitty

04 Allure 31017

Not the end of the world, as the DW informs me that we will be swapping out all of the brass items in the coach for satin nickle in the future. She says the insdie is hers, and she wants to swap them out... Tried to explain that the shower door has brass, the shower head has brass, the towel bars, etc. - she said if she could get 80% of them changed over, she would be OK with that. So, that light bar's days seemed to be numbered:)!
04 Allure Sold to a nice new owner! Now enjoying a 07 Magna Rembrandt 45' ISX600 #6775
"We're ONDROAD for THEJRNY!" (Toad and Coach license plates, say Hi if you see us!)
 

Re: Vanity light globes - break upon impact with sink:)!

Reply #1 –
Yahoo Message Number: 64578
http://www.itc-marine.com/index.html
hi smitty

i had the same problem, i like the teflon tape idea i got mine at itc the only problem is that they are about 15 % bigger than our stock ones. so i put the larger one in the bathroom, there is only three lights there and i put the larger one in the center

mike 2004 allure 31021