Re: Skid plate to prevent engine damage Reply #25 – August 02, 2003, 10:23:50 pm Yahoo Message Number: 5676I talked to "Kevin" earlier in the week, then he called me back today. Said that CC will not pay for the skid plate. Cost for the plate and installation will be somewhere around $800 and take nearly 2 weeks to get it here.Ree--back in JC Allure 30852 Quote Selected
Re: Skid plate to prevent engine damage Reply #26 – August 02, 2003, 10:43:18 pm Yahoo Message Number: 5677From: "Ree" ree@...>QuoteI talked to "Kevin" earlier in the week, then he called me back today. SaidQuotethat CC will not pay for the skid plate. Cost for the plate and > installation will be somewhere around $800 and take nearly 2 weeks to get itQuotehere.When this discussion started, someone said that there was possibility of damage when crossing 8" high speed bumps (which I think are not typical). The following 2001 SUV's have less than 8" minimum ground clearance, according to an *Automobile* magazine 4x4 buying guide:Audi Allroad Quattro, BMW X5, Chevrolet Blazer, Chevrolet Suburban, Chevrolet Tracker, Ford Escape, Ford Expedition, Ford Explorer Sport, GMC Jimmy/Envoy, GMC Yukon XL/XL Denali, KIA Sportage, Lexus RX300, Mercedes ML55AMG, Nissan Xterra, Oldsmobile Bravada, Pontiac Aztek, Subaru Forester, Subaru Impreza Outback Sport, Subaru Legacy Outback Wagon, Suzuki Grand Vitara, Suzuki Vitara, Toyota RAV4. Although the examples are a few years old, I suspect that a more recent list would reflect the same trend. In summary, if SUV's can't safely negotiate an 8" speed bump without potential damage, should we expect our motorhomes to do the same?Dick (& Geri) Campagna Intrigue #10571 Quote Selected
Re: Skid plate to prevent engine damage Reply #27 – September 01, 2003, 10:10:42 pm Yahoo Message Number: 6067This is an old subject, but thought I would give an update. I had the skid-plate installed at the factory. The charge was $263.98. It has probably already paid for itself. A few days ago I was coming out of a small truck stop and there was a steep hill before getting back on a road. The road had a bunch of bad spots where others had hit bottom. There was no other way out, and on the steep incline, it would have been extremely difficult to unhook the car and back up. I turned to hit the area at an angle so only scrapped it a little. I was sure glad to have the protection under there!There were a couple of people at the factory when I was there that have had to have the pan replaced because of damage.Ree Quote Selected
Re: Skid plate to prevent engine damage Reply #28 – September 01, 2003, 11:35:21 pm Yahoo Message Number: 6068Hi Ree,This skid plate problem seems to be an issue with only the 370/400 ISL engines. Am I correct in this thinking? Is it only an issue with the 40 foot units or are the thirty-six foot units also effected?David & Karen CA. 2000 Intrigue 11062 40 ft Single slide. PT 2002 Odyssey TOAD Quote Selected
Re: Skid plate to prevent engine damage Reply #29 – September 02, 2003, 04:05:40 pm Yahoo Message Number: 6072QuoteQuote from: Ree"I had theskid-plate installed at the factory. The charge was $263.98.ReeReeYou mentioned in a previous post that "Kevin" said that the skid plate would cost around $800 and take two weeks. If the cost is really $263.98, I will have it installed while I am at Camp Country Coach in Oct.Do they have the parts in stock? Did you have it scheduled before you went to CC for factory work?ThanksTom Royer2003 Allure 30858 Quote Selected
Re: Skid plate to prevent engine damage Reply #30 – September 02, 2003, 10:12:20 pm Yahoo Message Number: 6077I was pleasantly surprised at the change in cost. During the conversation I mentioned that someone on this list had it installed in 2 hours. I think they were planning a lot more time than that. Also, they had not done it before--so they said--so maybe they really did not know what was involved. You will need to order it ahead of time. I considered it a bargain!Ree2003 Allure 30852 Quote Selected
Re: Skid plate to prevent engine damage Reply #31 – September 02, 2003, 10:12:28 pm Yahoo Message Number: 6078My rig is a 370-ISLRee2003 Allure 30852 Quote Selected