Skip to main content ↑ ↓
Topic: xantrex rs 3000 inverter (Read 751 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

xantrex rs 3000 inverter

Yahoo Message Number: 74862
I have a 2008 Intrique 12244 and I have been having trouble with the Silver Leaf seeing shore power. All the other sensors work, tanks gen start but it shows not ac ord dc voltage so the generator starts if you but the air on even if plugged in. I have bypassed the eathernet cord and reset the inverter. I have taken power away from the inverter over night and reconnected it. I have installed a reprogramed box from silver leaf all with no luck. I had the same problem about two months ago and a newley programed box from Silver Leaf fixed the problem but now its back. Has anyone else had this problem or has anyone changed out their rs3000. They are not repairable. Any help would be welcomed

Re: xantrex rs 3000 inverter

Reply #1 –
Yahoo Message Number: 74865
I was told that the RS 3000 does not interface well with the Silver Leaf unless the Xantrex has the latest software I don't use the Silverleaf for inverter information BOB 06 Intrigue 12047
 

Re: xantrex rs 3000 inverter

Reply #4 –
Yahoo Message Number: 75159
I recieved my replacement inverter today from xantrex and had it installed and it works fine again. I got the Freedom 3000 and it was a direct plug in with no changes and no hassles. The silver leaf DID NOT need to be reprogramed and the wires all reached.. The inverter and the charger all worked but it would not comunicate any information that had to do with voltage to the silver leaf so when you turned the air on while plugged in the gen set would start. Hope no one else get this problem as it was a hard one to figure out.