Skip to main content ↑ ↓
Topic: Re-Installing sheered bolt in slide (Read 420 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Re-Installing sheered bolt in slide

Yahoo Message Number: 76070
Hi Stan

I just replaced my slide room torque tubes for the drivers side living room slide which were twisted and it was no big deal I got the tubes and bolts from Kevin Waite, and used the torque data sheet sent to me by Jock Vargo, the torque on the grade 8 bolts is 168+/-12 inch lbs (14+/-1 ft lb) Hope this helps

Jerry

2004 Inspire 51012