Skip to main content ↑ ↓
Topic: Some things to look for - Pop Rivets (Read 566 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Some things to look for - Pop Rivets

Yahoo Message Number: 76995
Mark, good timing.

This is a common problem on many Country Coaches. Last month I replaced more than 1/2 of the 150 or so rivets on my coach. I will have a Tech Tip article and pictures on this in the February Country Coach International eNews.

Lee
--

Lee (leozbrowski@...) 2007 Country Coach Intrigue 12153
CAT C-13

Re: Some things to look for - Pop Rivets

Reply #2 –
Yahoo Message Number: 77722
Re: [Country-Coach-Owners] Some things to look for - Pop RivetsSame question from us, Lee.

Mike and Mary Frederick
06 Inspire 51784

Re: Some things to look for - Pop Rivets

Reply #3 –
Yahoo Message Number: 77723
Quote

Quote
Same problem on a 97 Magna. Might want to think of using those self tapping metal screws with hex heads. Can be driven with cordless drill and have more body, i.e, not hollow, for holding. May not be able to use if head clearance is a problem but quicker to install and more holding force.

Leonard

97' Magna 5418
---

Re: Some things to look for - Pop Rivets

Reply #4 –
Yahoo Message Number: 77730
I replaced all of ours, and like you discovered it by a loose panel on right rear section. I found 3/16" rivets with a large head at Ace. The easiest way I have found is to disconnect the strut and have a helper (Kay) hold up the door while I drilled out the broken rivet and installed the new one.

Don and Kay Krahling
'01 Intrigue #11238
 

Re: Some things to look for - Pop Rivets

Reply #5 –
Yahoo Message Number: 77738
Mark. if you come to the CCFI rally in Harrisburg OR July 24-28 we will have many service techs there that will be giving CCFI club discounts and could fix all of the problem areas at a great price.

Jerry #60473