Skip to main content ↑ ↓
Topic: Over the window electric shades (Read 564 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Over the window electric shades

Yahoo Message Number: 80709
I have power shades over the windows in the DS living room slide and over the bedroom PS slide. Somehow they have become "jangled" and when I press the up arrow one goes up and the other goes down. I need to figure how to get them both going the same direction. The control runs both awnings and near as I can figure there is not an option to run just one awning. The awnings are Bruster and the control motors are Somfy. Anyone have any ideas?

-Dennis Holmes

12055 2006 Intrigue 530

Re: Over the window electric shades

Reply #1 –
Yahoo Message Number: 80714
I meant to say power awnings over the windows.

-Dennis Holmes

12055 2006 Intrigue 530
 

Re: Over the window electric shades

Reply #2 –
Yahoo Message Number: 80723
I figured it out. I found a junction box for one of the awnings behind a panel in the bedroom and disconnected power to that awning and was able to change the other one so they are in sync.

-Dennis Holmes

12055 2006 Intrigue 530