Skip to main content ↑ ↓
Topic: tracstar (Read 585 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

tracstar

Yahoo Message Number: 80726
I have a tracstar dome in my 2008 CC Intrgue and had the circuit breaker off for 12 hours now it will not find the sat. do I need to do a setup

Re: tracstar

Reply #3 –
Yahoo Message Number: 80729
Hi Marvin, If the dome has a clear veiw of the sky try to do an O-recalibrate.

5.2 O-RECALIBRATE

The O-Recalibrate is used when the antenna has difficulty lockin onto the correct satellite or will not lock on to any satellite.
Perform O-Reclaibrate:
1. With the TracStar system powered on, press the Start/Stop button on the display (IDD). The screen should read "IDLE HOLD."
2. Press the MAIN button once. The screen will read "User Setup."
3. Press the button once. The screen will read "Set Region."
4. Press the " + " button until "O-Recalibrate" appears on the screen.

5. Press ENTER. The screen should read "IDLE HOLD."
6. Press START/STOP and the display will go into "SCAN ALIGN."

Marta

07 Allure 31501

Re: tracstar

Reply #4 –
Yahoo Message Number: 80730
Hi O recalibrate should do the trick. Check owners manual. It usually fixes our issues.
Ed

08 intrigue #12260

Re: tracstar

Reply #5 –
Yahoo Message Number: 80731
Go to their web site and do a reset as described in the manual. It will usually correct the condition.

Mikee