Skip to main content ↑ ↓
Topic: Pioneer Avic camera question (Read 605 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Pioneer Avic camera question

Yahoo Message Number: 84681
Our pioneer nav/screen seems to not let us see the cameras when in motion. It puts a note on the screen about being in motion, it functions fine when stopped and in park. Is there a way to change this? I sure would like to see whats behind me when backing up or whats in my lane when changing lanes!

We have an 06 magna

Re: Pioneer Avic camera question

Reply #1 –
Yahoo Message Number: 84683
We had this happen when we replaced our Pioneer..
Turned out we had the rear camera cable plugged into the inbound tv signal port- not the camera port.
Might want to check the schematic to see if the solution is as simple as moving the line.

Good Luck,
Russ

05 Intrigue
11883

Re: Pioneer Avic camera question

Reply #2 –
Yahoo Message Number: 84693
Our flip screen went out on our Magna and when we replaced it we had this problem so we put a rotary on-off-on switch inline on the ground wire. So now when the message comes up we turn the switch and everything works.

Hope this helps.

Tammy T
Magna 5605

Panama City, FL
 

Re: Pioneer Avic camera question

Reply #3 –
Yahoo Message Number: 84696
Hu? You put a ground interrupt switch on the power supply side of the radio and just switch it ? Seems weird.

J