Re: Generator Turns off
Reply #7 –
Yahoo Message Number: 90607
Hi Stan - Good to get the problems out of the way early in the trip!!!! (Sorry on a hot day, that this is happening.)
In addition to the belt. If the radiator fluid was changed at this service too, you could be a bit low on fluid. Adding fluids to these at change over, can sometimes result in air gaps, that then work their way out under longer running. Resulting in lower fluids.
If this is an Onan, you should be able to pull a code by the blinking lights. It is Heat Related (can't remember the code, but think it is 33), then it could be: The belt. - or - The air gap caused low fluid. - or - The dreaded Temp Sensor. (Do a search on my Onan Tem Sensor journey, and you will see what that means.)
Best of luck,
Smitty