Skip to main content ↑ ↓
Topic: model number for ridewell suspension 08 magna (Read 860 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

model number for ridewell suspension 08 magna

Yahoo Message Number: 95126
I found a nut loose on the rear suspension and its marked 1000lbs torque. I contacted ridewell and they want a model number. I cant seem to find a model number. I know its a radt 246 but apparently there are some additional numbers. I'm not sure if country coach has the info but based on my last call to them they are my last source of information. I have looked all over the suspension. Can anyone tell me where to look? Rod

08 Magna 6882

Re: model number for ridewell suspension 08 magna

Reply #1 –
Yahoo Message Number: 95141
Our Intrigue had the same loose rear suspension fastener. Was having CC do an alignment when it was found and nearly ready to come off! Could have resulted in a catastrophic loss of rear end! Our chassis was constructed in 2008. There is a specification for 1000 ft/lb torque. Coriwelsh12314 Intrigue Sent from Yahoo Mail for iPhone From:

jrodneyrobbins@... ;
To:
;

Subject:

[Country-Coach-Owners] model number for ridewell suspension 08 magna Sent:

Tue, Apr 29, 2014 2:55:11 AM

I found a nut loose on the rear suspension and its marked 1000lbs torque. I contacted ridewell and they want a model number. I cant seem to find a model number. I know its a radt 246 but apparently there are some additional numbers. I'm not sure if country coach has the info but based on my last call to them they are my last source of information. I have looked all over the suspension. Can anyone tell me where to look?Rod08 Magna 6882
 

Re: model number for ridewell suspension 08 magna

Reply #2 –
Yahoo Message Number: 95155
I have the information regarding the suspension but am still in the process of coming up with a solution for getting it tight. The nut is behind a plate that makes getting a socket on difficult . I can get an 1 7/8 wrench on it but will never get the 1000lbs with a wrench. I am discussing it with ridewell.
Rod