Skip to main content ↑ ↓
Topic: Dometic Toilet Gasket Kit (Read 843 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Dometic Toilet Gasket Kit

Yahoo Message Number: 97811
Hi - I was wondering if anyone has done the gasket kit rebuild on their Dometic ceramic toilet?? Mine is leaking sometimes which causes the water to leave the bowl. Model is 3010 and S/N 002482. Just wondering what's involved with the job. Who's got the parts, etc. Many thanks for any input you can provide. Safe travels.

Photo of toilet is here:

http://muniac.smugmug.com/Maintenance/Toilet-Treatments/i-NRr3gGn/0/M/IMG_3663-M.jpg --

Best - Scott

2006 Allure 430 40' #31349

(Bus-Stead Lemon) My Allure Page http://www.muniac.com/Allure%20Page.html

Re: Dometic Toilet Gasket Kit

Reply #1 –
Yahoo Message Number: 97825
Scott, I am not familiar with your Dometic Model 3010 so I pulled up on google the blow up of parts on internet. I couldn't tell what parts you need.

I have a Thetford "Aria Class II" electronic toilet that I have replaced the Seal Replacement Package Twice and the Motor Mechanism Assembly once. I would contact Dometic directly and get with Technical to describe you problem and parts needed, the worst part is lifting these units turning them upside down and vise versa.

Mike 03 allure 1st Ave. #30898
 

Re: Dometic Toilet Gasket Kit

Reply #2 –
Yahoo Message Number: 97826
Thanks. I located the exploded view of the toilet with part numbers.
Dyers has all the parts that I think I'll need. Insert, ball, gaskets, 3 L-bolts and o-ring seal. I'm hoping CC used the floor flange adapter which will mean I can lift out the toilet without going into the plumbing bay to disconnect the line into the black water tank. I'll provide an update on the repair per usual. I'm hoping the job goes smoothly. Wish me luck!

Best - Scott

2006 Allure 430 40' #31349

(Bus-Stead Lemon) My Allure Page http://www.muniac.com/Allure%20Page.html