Skip to main content ↑ ↓
Topic: 08 magna engine cover (Read 949 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

08 magna engine cover

Yahoo Message Number: 99896
Does any know how the engine cover is removed? It looks like it may go into the closet but I don't see and bolts coming through from the bottom. This looks to be a different type of cover then my inspire.
Thanks
Rod

Re: 08 magna engine cover

Reply #1 –
Yahoo Message Number: 99908
On my Magna, the cover slips under the closet trim a bit. When I open the latches, I can raise the side of the cover near the bed and the cover will easily slip out from under the trim.

Paul

2004 Magna 6301

Re: 08 magna engine cover

Reply #3 –
Yahoo Message Number: 99913
On my 07 Intrigue the cover is a large plywood square, about 2.5 FT on a side, covered by a carpet, glued to the wood I guess. You need to find a seam and pry it up. I use a pry bar. The plywood is held in place by industrial Velcro. Once it's off the rest is obvious.

Lee (leozbrowski@...) President, CCI

2007 Country Coach Intrigue 12153
CAT C-13

Re: 08 magna engine cover

Reply #4 –
Yahoo Message Number: 99915
Hi Lee

The manual shows something like you say which is a hatch in a flat floor. On this one their is a box about 4 inches high. It looks like the whole box lifts from looking under but I am having trouble figuring out what's holding it down. Someone will chime in.
Rod

Re: 08 magna engine cover

Reply #5 –
Yahoo Message Number: 99917
Rod, sorry I can't help you there, don't have the box you describe. You'll figure it out. Good hunting.

Lee (leozbrowski@...) President, CCI

2007 Country Coach Intrigue 12153
CAT C-13