Skip to main content ↑ ↓
Topic: Diesel Generator Side (Read 1286 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Diesel Generator Side

Yahoo Message Number: 102961
Having some trouble with my slide out for the diesel generator. When flipping the extend switch the motor engages and runs continuously. The slide mechanism operates in a surging fashion, traveling for 2-3 inches, stops, then travels another 2-3 inches. Visual examination of the motor shows continuous operation, even during the times when the slide stops, except the frame for the motor will rotate until the force becomes great enough to push the slide.

I suspect my roller bearings for the slide are faulty. I have used wd40 for cleaning then a graphite dry spray for lube. I called Kevin Waite for replacement bearings but he cannot locate them.

Has anyone had similar troubles and were able to locate replacement bearing?

Mark and Denise

Back in Colorado, after a Mexico excursion 07 Inspire 51985

Re: Diesel Generator Side

Reply #1 –
Yahoo Message Number: 102964
You may need a new drive mechanism from power gear the Supplier to CC. I had to replace
mine.  Bob 12047 intrigue 2006

Re: Diesel Generator Side

Reply #2 –
Yahoo Message Number: 102973
I had a very similar  problem with the Gen.  slide not extending.  I needed the entire motorized shaft replacement.  I got that directly from CC.  But that was about 10 years ago.  The replacement has worked great.
Denny Zarnt  2001 42' Affinity, B& B  # 5972

Re: Diesel Generator Side

Reply #3 –
Yahoo Message Number: 103101
As a follow up to my generator slide problem. I have located the slide bearing on the passenger side which carries the weight on the guide rail. I found the bearing mounted vertically has frozen causing increased friction and load for the motor. Have called Country Coach twice now to get the part but have yet to speak with a live parts person.

Mark and Denise
07 Inspire 51985

thinking of heading to the Gulf Coast for Nov-Dec

Re: Diesel Generator Side

Reply #4 –
Yahoo Message Number: 103102
Mark, why not give Kevin Waite a call and see if he can get the part for you. It's worth a try.541-953-6162Sent from Yahoo Mail on Android    From:"Mark mx30mark@... [Country-Coach-Owners]" Date:Wed, Sep 30, 2015 at 12:33 PMSubject:Re: [Country-Coach-Owners] Diesel Generator Side As a follow up to my generator slide problem. I have located the slide bearing on the passenger side which carries the weight on the guide rail. I found the bearing mounted vertically has frozen causing increased friction and load for the motor. Have called Country Coach twice now to get the part but have yet to speak with a live parts person. Mark and Denise07 Inspire 51985thinking of heading to the Gulf Coast for Nov-Dec

Re: Diesel Generator Side

Reply #5 –
Yahoo Message Number: 103104
I did, he cannot source it and said I have to go through CC. During my CC experience the factory has been disappointing. Love my coach though.
On Sep 30, 2015 10:49 AM, "D Frye stratman50th@... [Country-Coach-Owners]"  wrote:
 Mark, why not give Kevin Waite a call and see if he can get the part for you. It's worth a try.541-953-6162Sent from Yahoo Mail on Android    From:"Mark mx30mark@... [Country-Coach-Owners]" Date:Wed, Sep 30, 2015 at 12:33 PMSubject:Re: [Country-Coach-Owners] Diesel Generator Side
 As a follow up to my generator slide problem. I have located the slide bearing on the passenger side which carries the weight on the guide rail. I found the bearing mounted vertically has frozen causing increased friction and load for the motor. Have called Country Coach twice now to get the part but have yet to speak with a live parts person. Mark and Denise07 Inspire 51985thinking of heading to the Gulf Coast for Nov-Dec

Re: Diesel Generator Side

Reply #6 –
Yahoo Message Number: 103105
If you are able to remove the suspect bearing, most any automotive parts store should be able to find a replacement.
Tom R

2006 Intrigue 12057

Re: Diesel Generator Side

Reply #8 –
Yahoo Message Number: 103107
Tom,

I need to lift the weight off the rail from the generator. My thought is to use a Harley hydraulic motorcycle stand and remove enough to take the weight from the rails and bearing to back out the threaded bolt attached to the bearing and *hopefully* find a replacement. So frustrated with CC though.

Mark

Re: Diesel Generator Side

Reply #9 –
Yahoo Message Number: 103108
Lonny and Diane

Country Coach manufactured the slide for the generator.

Mark

Re: Diesel Generator Side

Reply #10 –
Yahoo Message Number: 103251
As a follow up, generator slide is fixed with a replacement load carrying bearing. Calling Country Coach and getting a response was not productive. I found a replacement, Koyo CRSB-20 which replaces a McGill CF-1 1/4-SB. These are the load carrying bearings. Still looking for a replacement for the guide bearings.

Mark Laser

07 Inspire 51985

Re: Diesel Generator Side

Reply #12 –
Yahoo Message Number: 103260
Barney,

That's it, what about the guide bearing? :)

Mark
 

Re: Diesel Generator Side

Reply #13 –
Yahoo Message Number: 103262
Mark,

Can you see a part number on the old roller? If so I can probably find it.

Barney