Skip to main content ↑ ↓
Topic: Running Lights Out correction (Read 641 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Running Lights Out correction

Yahoo Message Number: 8863
In my previous post, I said wire #10 went from the headlight switch to the tail light/marker relay. I should have said wire #11. Hope I didn't scramble your thinkers with this foopaw.
Claude

1997 Affinity #5448
 

Re: Running Lights Out correction

Reply #1 –
Yahoo Message Number: 8870
Claude,

Did you get your problem fixed? If not, do you have power at the headlight switch? If so the next connection is in one of the multi wire plastic blocks under the shifter pad. There are actually two #11 wires and either may be your problem. Familiar with problem as I had same & found bad connection in multi wire block. If you have power coming out of block, do you have power in rear before the light fixtures?

Hope this helps...............
Steve

Intrigue #10673

Quote from: subsailor650