Skip to main content ↑ ↓
Topic: Auto Awning Control Box & Problems - Mirage (Read 462 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Auto Awning Control Box & Problems - Mirage

Yahoo Message Number: 14402
Anyone know where CC hid the control box for the Colorado Mirage Awning? I want to adjust the wind sensor.

Have had all kinds of problems, just replaced an entire spring arm assembley with help from the factory rep, took all day and even he had to have many phone calls with the techs in Colorado. It's a very poor design and very few service facilites have a clue how to adjust the arms, lead rails, knuckles, pitch, etc. Even a factory tech told me the awning should have a third spring arm because of the excess (21') length. Caution - if it gets out of adjustment, it will cause the awning to roll in crooked and jam the lead rail over one of the end caps causing paint damage and all kinds of nasty problems.
Also, make sure your motor shuts off when retracting, it's hard to hear if there is outside noise, the motor will burn up and you will never know it. An awning that operates on 110 Volt on a Coach is NUTS. Sorry for the rambling...
Tom

04 Allure 30979