Skip to main content ↑ ↓
Topic: No A/C to Frig (Read 511 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

No A/C to Frig

Yahoo Message Number: 88442
I recently had the Amish/Pines cooling unit installed in my NorCold 1200. I have a NO AC error code. I checked to make sure the AC plug is in, fuse OK, breaker OK. It works on LP OK. Would appreciate any ideas on what to do next.

Michael

05 Inspire 51381

Re: No A/C to Frig

Reply #1 –
Yahoo Message Number: 88443
Have you verified AC voltage, with a meter or other AC device, at the outlet?

Jim 07 Allure #31570
 

Re: No A/C to Frig

Reply #2 –
Yahoo Message Number: 88457
Ok - sounds like you checked the basics...But check the outlet that the refer plugs into with a tester of some sort - (ie, light, drill, hair dryer) and verify that you have power there. If not then figure out why, is the breaker tripped or still off from when work was being done. It could be that the elements aren't plugged into the board or plugged onto the board wrong. Double check the schematic and make sure the heat elements are installed onto the board correctly - it's a total of 4 wires, 2 from each element. I'm not sure top of my head if that's the code when this happens, but it won't work if it's wired wrong - that I do know!

Good luck & double check
Jim

From:Michael Title Sent: Thursday, June 06, 2013 7:31 AM To:Country-Coach-Owners@yahoogroups.com Subject: [Country-Coach-Owners] No A/C to Frig

I recently had the Amish/Pines cooling unit installed in my NorCold 1200. I have a NO AC error code. I checked to make sure the AC plug is in, fuse OK, breaker OK. It works on LP OK. Would appreciate any ideas on what to do next.

Michael

05 Inspire 51381