Skip to main content ↑ ↓
Topic: Power Tech, 7000 (Read 595 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Power Tech, 7000

Yahoo Message Number: 73508
Anyone change the fan belt on a PT, bay mounted in an Intrigue? Looks like you need to remove the radiator to get to the belt.

Judy n Joe

98 Intrigue 10578

Re: Power Tech, 7000

Reply #1 –
Yahoo Message Number: 73509
Thin leather gloves will save you some knuckle skin. If you loosen the four 10mm bolts securing the water pump pulley, it will tilt down enough to slip off the old belt and the new one on. You may have to remove two or three of the bolts to get enough belt slack. I don't recommend removing all four! Re-tightening the bolts tensions the belt. Radiator removal was not required, just some careful maneuvering the belts around the fan blades. It is a pain, but doable.

Dave

2000 Allure #30444

Re: Power Tech, 7000

Reply #2 –
Yahoo Message Number: 73510
Judy n Joe

You are correct! I had a radiator leak and while it was off had them change the belt.

Vick Welsh

99 Intrigue 10714

Re: Power Tech, 7000

Reply #3 –
Yahoo Message Number: 73529
Friend I have a PT 7kw! I called Power tech in Leesburg Florida! Remove the Fan belt guard only, Roll off the belt! I went to NAPA and got a Rpl. belt. Roll the new one on! Put the old one in the Bay Just in case, Did this three years ago! Working for Cat I never did this to a Cust. unit but for me it worked! I removed the Bay door and put the slide in! Too old and Fat! Good Luck! BTW a friend has a 00 Allure with a PT 8kw and this unit has a Squirrel Cage Fan, No can do! While your down there check for cracks on your Fuel lines! Ken 99 Allure 30356
 

Re: Power Tech, 7000

Reply #4 –
Yahoo Message Number: 73546
Thanks for the info. I wondered about how to change that belt.

Steve & Jane
1998 Intrigue
#10557