Skip to main content ↑ ↓
Topic: Step cover (Read 777 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Step cover

Yahoo Message Number: 57010
Has anyone experienced a problem with the step cover in front of the pax seat. Mine will not extend. I can not find a fuse that controls the motor.
John Bennett 2007 Magna 6751

Step cover

Reply #1 –
Yahoo Message Number: 57014
Has anyone had any experience with the step cover in front of the pax seat? we are on the road and the cover will not extend.
2007 magna 6751

Step cover

Reply #2 –
Yahoo Message Number: 57015
has anyone had a problem with the step cover in front of the pax seat. mine will not extend.
2007 magna 6751

Re: Step cover

Reply #3 –
Yahoo Message Number: 57019
Quote from: jbennett2cflrr"

> has anyone had a problem with the step cover in front of the pax seat. mine will not extend.
2007 magna 6751
We had our Intrigue one year when the little motor that operates the step, died. Not hard to install. lee 07 intrigue #12099

Re: Step cover

Reply #4 –
Yahoo Message Number: 57153
John.....Did you figure out what the problem was with your step cover motor? Just curious.

Dave Trotter

01 Intrigue 11215

Re: Step cover

Reply #5 –
Yahoo Message Number: 57175
Well I finally figured it out. The problem was the multiplex system. After disassembling the entire cover and removing the actuator, I found that there is a multiplex module behind the magazine rack that is next to the pax seat. Remove the magazine rack and I found the fuse laying on the floor it had fallen out of the multiplex.
John