Skip to main content ↑ ↓
Topic: Exhaust Pipe Diameter (Read 1343 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Exhaust Pipe Diameter

Yahoo Message Number: 70749

Just a thought Stan - we added a straight stainless extension purchased from CC back when. It extends no more than an inch or so beyond the body. I considered a turn down but after looking at them and seeing the edge of the pipe would now extend at least 5 inches beyond the body (the diameter of the pipe) I would now have to worry about it hitting or getting hit during close calls. I just don't like things sticking out much if at all. Since the exhaust on the Inspire is surrouned by fiberglass body work, the damage to the coach from the longer pipe getting involved with something could be very expensive.
As warm air will rise based on the laws of physics alone, using a turn down end will not stop the gases from making it to neighbors anyway.
(I have the information on the manufacturer of the stainless extensions CC used if you are interested - just let me know and I will try to find it.)

Bob (rthandren@...)
'05 Inspire 51178

Re: Exhaust Pipe Diameter

Reply #1 –
Yahoo Message Number: 70751
Bob,

I never thought about the clearance issue. I purchased a chrome turn down. I am going to go to the motorhome this morning and determine how much it extends beyond the coach. Fortunately I saved the bill and will be able to return.

Stan

Re: Exhaust Pipe Diameter

Reply #2 –
Yahoo Message Number: 70753
Another down turn thing to consider is the dust one will kink up in unpaved areas.

Leonard

97' Magna 5418

Re: Exhaust Pipe Diameter

Reply #3 –
Yahoo Message Number: 70754
Stan & Bob:

From the DOT standards, your exhaust tip should extend no more than 2" beyond the body of the coach.

Kevin Waite (Former Country Coach Service Tech.) K&M Mobile R.V. Repair LLC
95430 Noraton Rd.

Junction CIty, OR. 97448
541-998-8132 (Home/Office)
541-953-6162 (Cell)

kvn.wt.7629@...

Re: Exhaust Pipe Diameter

Reply #4 –
Yahoo Message Number: 70757
Do you have one for an 2004 Inspire? Walt

center
From: Country-Coach-Owners@yahoogroups.com [mailto: Country-Coach-Owners@yahoogroups.com ] On Behalf Of Kevin Waite Sent: Saturday, May 07, 2011 10:52 AM To: country-coach-owners@yahoogroups.com Subject: RE: [Country-Coach-Owners] Re: Exhaust Pipe Diameter

Stan & Bob:

From the DOT standards, your exhaust tip should extend no more than 2" beyond the body of the coach.

Kevin Waite (Former Country Coach Service Tech.) K&M Mobile R.V. Repair LLC
95430 Noraton Rd.

Junction CIty , OR . 97448
541-998-8132 (Home/Office)
541-953-6162 (Cell)

kvn.wt.7629@...
center
To: Country-Coach-Owners@yahoogroups.com From: alepuzz@...

Date: Sat, 7 May 2011 07:52:30 -0700 Subject: Re: [Country-Coach-Owners] Re: Exhaust Pipe Diameter

Bob,

I never thought about the clearance issue. I purchased a chrome turn down. I am going to go to the motorhome this morning and determine how much it extends beyond the coach. Fortunately I saved the bill and will be able to return.

Stan

Re: Exhaust Pipe Diameter

Reply #5 –
Yahoo Message Number: 70761
Kevin,

Thank You, I did not know but I have been told by many

Thank You

Stan 2005 Inspire

Re: Exhaust Pipe Diameter

Reply #6 –
Yahoo Message Number: 70762
Walt,

It has been brought to my attention that the turn down would be illegale because it wouldprotrodude bryond the two inch limit.

Stan 2005 Inspire

Re: Exhaust Pipe Diameter

Reply #7 –
Yahoo Message Number: 70763
I do not want two turn it down I just want to get the 2" out of mine, mine is much less than 2" Walt

Re: Exhaust Pipe Diameter

Reply #8 –
Yahoo Message Number: 70772

My tip does not exceed the 2", not even knowing the DOT rule I don't want a 5" pipe sticking out any appreciable distance. Lots of potential for trouble.
Any truck stop should have dozens of chrome plated exhaust ends in stock. An exhaust shop will have steel pipe and can cut to any length and both can supply clamps including sleeve type clamps that don't require the pipes to slip into each other.
Summitt Racing sells 5" exhaust tips; there is also good ol' JC Whitney and there are hundreds of truck dressup sites on the web.
According to messages in the archives, Standley Manufacturing is the company who made the stainless tips for CC, I believe they are located in Junction City.
541-689-1603 (voice)
541-689-8914 (fax)

That is what I used but beware they are proud of them. I got mine from CC parts while they were still selling parts. You might also check with the current CC shop as they suppoedly have spare parts from the old company.

Bob (rthandren@...)
'05 Inspire 51178

Exhaust Pipe Diameter

Reply #9 –
Yahoo Message Number: 70774
Just go to Junction City Muffler shop everyone else does; (541) 998-3130 Go to the source.

Dave Rousey Jr./ Owner
Former CC Technician
Styleworks RV Repair &
Restoration

33070 Roberts Ct.
Coburg, OR 97408
(541) 543-7983

http://styleworksrvrepair.com dave@...