Skip to main content ↑ ↓
Topic: How to fix a 2004 intrigue Holding tank rinse system failure (Read 456 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

How to fix a 2004 intrigue Holding tank rinse system failure

Yahoo Message Number: 71704
Go to my pictures on this web site and see how easy it is to clean out the flush nozzles on a 2004 intrigue waste water tank. 2 minutes if you are slow. I have it down to one minute because I have done it a few times.
I know some of you do not have it this easy but I can assure you that those nozzles are getting clogged because crap is making its way back into the tiny nozzle holes from sloshing around in the tank when they are 3/4 full and going down the road.

There is nothing you can do about it if you drain the tank and let the crap dry in the nozzle and then plug it up. My pictures I just posted show how this is happening. If you look at the last few pictures you will see the description and an actual picture of a nozzle that is starting clog up. I got my cell phone camera up close to take a look at the inside of the nozzle.

There is no need to remove the flang to clean the nozzle out!
Here is the link to my photos of my coach in progress (more like money pit hobby):

photos/album/370769381/pic/14 94495034/view?picmode=&mode=tn&order=ordinal&start=41&count=20&dir=asc

Regards,

Dallas 2004 intrigue ovation C12 11688