Skip to main content ↑ ↓
Topic: Working on another problem (Read 539 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Working on another problem

Yahoo Message Number: 72319
As I reported the ride height was my last issue. Now a new problem has come up. My backup camera is off. I was told if you got sound the back room then the fuse was OK. However, I can not located fuse. There are three wires exiting the camera, one looks like a video lead the other power, or red wire the third is gray or white but has no mate.
The unit itself a 2" by 4" but with my eyes I cannot read the "Maker etc." The camera just stop working on the road, and it is most annoying if you wondering about your tow.

Any help would be appreciated

Jim Spivey

Re: Working on another problem

Reply #1 –
Yahoo Message Number: 72337
2 things to check:
1. If it's Pioneer there is a reset procedure. I don't have it handy, but found it on an RV forum. Maybe someone on this group will have it handy.
2. Ours quit working and we found another post that said look under the dash and there are wires that work loose. We unplugged ours, plugged them back in and voila! Fixed the problem.
Lonny & Diane
'04 Allure 33'
#31065

Re: Working on another problem

Reply #2 –
Yahoo Message Number: 72341
In our '03 LEXA the camera is accessed through a panel in the rear clothing closet. The wire from the camera is plugged into an extension that runs forward to the dash. I unplugged and replugged-in that wire and the camera worked once again. I've had to do this several times over the past few years.

Mel Shapiro
2003 LEXA