Skip to main content ↑ ↓
Topic: Need Help Xantrex Inverter/Charger 3.0 (Read 710 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Need Help Xantrex Inverter/Charger 3.0

Yahoo Message Number: 74030
On our way to Wyoming I decided to turn on the inverter to run the frig while we drove. I stopped, engine running, pushed the inveter button. Both the fault and temp led came on. I pushed the reset and the screen shows: NO XX

Now it will not work at all. Can anyone help?

John

Allure 31242

PS: my wife told me to quit touching buttons........................

Re: Need Help Xantrex Inverter/Charger 3.0

Reply #1 –
Yahoo Message Number: 74031
John,

Had the same problem recently. The cooling fan quit and it overheated. Give it some time to cool and see if it starts working again. If it does check to see if the fan is working. I replaced the fan for less than $15.
Barney

On Aug 27, 2011 3:57 PM, "jh" jg1199@...> wrote: > On our way to Wyoming I decided to turn on the inverter to run the frig while we drove. I stopped, engine running, pushed the inveter button. Both the fault and temp led came on. I pushed the reset and the screen shows: NO

Quote
XX

Now it will not work at all. Can anyone help? >

John

Allure 31242
> PS: my wife told me to quit touching buttons........................

Re: Need Help Xantrex Inverter/Charger 3.0

Reply #2 –
Yahoo Message Number: 74039
I can hear the fans running but it apprears there is no power to the moniter panal. it just shows "NO" over "XX"

Re: Need Help Xantrex Inverter/Charger 3.0

Reply #3 –
Yahoo Message Number: 74041
John,

There's a white reset button next to where the large black cable connects. Try giving it a push.
Barney

On Aug 27, 2011 7:11 PM, "jh" jg1199@...> wrote: > I can hear the fans running but it apprears there is no power to the moniter panal. it just shows "NO" over "XX"

Quote
>

Quote from: Barney Moen
John,
>> Had the same problem recently. The cooling fan quit and it overheated. Give >> it some time to cool and see if it starts working again. If it does check to >> see if the fan is working. I replaced the fan for less than $15.

Barney

On Aug 27, 2011 3:57 PM, "jh" wrote: >> > On our way to Wyoming I decided to turn on the inverter to run the frig >> while we drove. I stopped, engine running, pushed the inveter button. Both >> the fault and temp led came on. I pushed the reset and the screen shows: NO >> > XX
>

> Now it will not work at all. Can anyone help? >> >

> John

> Allure 31242
>

> PS: my wife told me to quit touching buttons........................
>