Skip to main content ↑ ↓
Topic: Parts CC (Read 745 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Parts CC

Yahoo Message Number: 76625
Looking for the Cabinet Latches (2000 Affinity). They are small brass ketch with a set screw to adjust the spring loaded ball bearing. Anyone know the manufacturer or a place to pick some up. Can't get a call back from Country Coach parts.
Also looking for a Carling LT-1561-113-012 switches. Talked with Carling and they gave me a few distributers. One's I called don't have any in stock and other online ones want me to buy a minim of 6 and one wants me to buy 12. All have a 4 week lead time to obtain. Carling said that is their time to make the switches.

Again no call back or answer from Country Coach.

Any suggestions, appreciated.

Re: Parts CC

Reply #1 –
Yahoo Message Number: 76626
Cef,

Howdy,

I picked up some of the brass catches from the local RV dealer. Also saw some at the local Camping World. Shouldn't be hard to find.
Don't know about the switches. What are they for? I will probably need some eventually.

Luck,
Bob

01 Affinity 42 #6009

Re: Parts CC

Reply #2 –
Yahoo Message Number: 76627
I have these cabinet latches in stock and possibly the switches. Feel free to contact me off forum if interested.

Kevin Waite (Former Country Coach Service Tech.) K&M Mobile R.V. Repair LLC
95430 Noraton Rd.

Junction City, OR. 97448
541-953-6162 (Cell)

kvn.wt.7629@...

Re: Parts CC

Reply #4 –
Yahoo Message Number: 76652
Thanks for everyones input. I found the switches at Custom Marine (800 992-7922). For anyone's future needs. The switch is a Carling LT-1561-113-012. It is a three way switch that when in neutral is white when toggled one way it is red and the other is green. Black with a plastic round ring. Toggle is clear, duck bill in shape with edges on side. Carling has to make them when ordered. Custom Marine can also produce them for Carling.
Kevin Waite had the latches and all is well.
Continue to bring everything back to it's original or better condition. Now working on the HWH mother board.
Had Michigan Cat do all maintenance on the engine and brought it up to specs, including the Genny.
Had New tires placed, alignment, shocks checked along with brakes. Both are new.
Holland motors pulled windshield and window in door aligned and sealed got rid of road noise, leaks. Had them service and replace Hydronic front motor and do 1000 hour maintenance, even though I doubt it has been used more then a couple hundred hours if that. Did try it out in Wisconsin with zero temps, it actually got to hot and had to turn everything down. Also put in bypass for winterization and now we're in winter mode.
Putting on new awning over slide.

Have gone through and replaced all lights that need replacement, still need to replace two road lamps, fogs and other lights all working. Replaced all docking lights, hard to find them Halogens but a truck parts place near home had them . A bit pricy but cheaper then LED one's. Replaced storage bay gas door spring rods. Fixed all storage automatic locks and key locks.
Just returned from a 2600 mile trip and everything worked as supposed to with great fuel economy, towing our Beetle Bug.

Thanks again for everyone's input.

Cef

Re: Parts CC

Reply #6 –
Yahoo Message Number: 76664
FYI:

You have to make sure that the latches you see & purchase online are the same as the ones that CC installed, most of these latches will not have the same size ball bearings installed in them which means if you lose just the ball it will not fit in the OEM latch.

Kevin Waite
541-953-6162