Skip to main content
Topic: Gray rod/tube with 5/8" socket and end??? (Read 572 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Gray rod/tube with 5/8" socket and end???

Yahoo Message Number: 77769
I have no idea if this rod belongs with my 40' 2000 Magna or not. It is gray plastic about 7/8" in diameter and 7-3/4" long. There is a 5/8" hex socket on one end and the rod/tube is mostly hollow. The other end has a molded on 5/8" hex 'nut' with a 5/16" diameter hole going through two flats of the nut.
This thing just appeared on my galley floor a couple of days ago while I was traveling on some rather rough roads. I've search around the galley area and can't find anything that appears to match up with it.
Does anyone know if it belongs with the coach and if so, what purpose it has?

pete

40' 2000 Magna #5892
Pete
 2000 40'  Magna #5892  CAT C-10

Re: Gray rod/tube with 5/8" socket and end???

Reply #1
Yahoo Message Number: 77771
Pete,

It may be an installation tool for the kitchen faucet??? .....some of the faucets needed this special tool to install them, and it would be a one time use item, usually left behind for the homeowner in case they needed it to uninstall the faucet later. Dont heave it out, put under sink....
Just a guess...

Jerry Moore

Auto Cadd Design Service LLC
10 Scenic Way

Middletown, NJ 07748
phone 732-671-6080
cell 732-233-4797
fax 732-671-5860
email jmoorepb@...

email jmoorepb@... www.autocadddesignservice.com travel blog www.autocadddesignservice.com/wordpress




Re: Gray rod/tube with 5/8" socket and end???

Reply #2
Yahoo Message Number: 77778
SOunds like a faucet tool, most likely left by the original workers

Mikee

Re: Gray rod/tube with 5/8" socket and end???

Reply #3
Yahoo Message Number: 77788
sounds like trans-dimensional teleportation..................................... it belongs in a Zerdamol stove in the Andromeda galaxy.

Dave

aka Billy Byte (trusty hound)
2000 Allure #30443