Skip to main content ↑ ↓
Topic: Entry Door Wire Loom (Read 1641 times) previous topic - next topic
0 Members and 1 Guest are viewing this topic.

Entry Door Wire Loom

Yahoo Message Number: 77882
Key Fob doesn't work and the entry key pad doesn't work. Some of the wires in the loom have broken and some about to break. What's the consensus on whether to replace the loom or try to splice the wires? If replace, then do you know where I could get the replacement?

Dennis Holmes
2006 Intrigue 530
#12055

Re: Entry Door Wire Loom

Reply #1 –
Yahoo Message Number: 77883
Hello Dennis

Check with Kevin Waite. He can get parts.


George James, wb5ldn
08 Affinity, 6877

Re: Entry Door Wire Loom

Reply #2 –
Yahoo Message Number: 77884
Dennis,

I spliced mine some time ago. There is not much wire to work with so it is a bit tedious. Also, be very sure you make the right matches or some things will not work properly. After splicing I placed heat shrink over the splices. Be sure to test all functions before closing things up. To replace the entire loom looked like a major project but that is just one man's opinion.
Lyle Wetherholt
04 Intrigue 11740

Re: Entry Door Wire Loom

Reply #3 –
Yahoo Message Number: 77885
I rewired the whole loom and used shrink tubing as part of the process.
Used progressively large shrink wrap and ended with 3 layers.. that hold a specific shape.
When completed the loom slides in and out of the door. A spring was added inside the door to pull the wire in when the door closes.
The result was.. no more bending and potential breaking.

Not my idea.. came from a great mind here on the Yahoo site.

Hope this helps,
Russ

05 Intrigue 11883

Re: Entry Door Wire Loom

Reply #4 –
Yahoo Message Number: 77886
Replacing the cable is the best way to Be confident the locks will work as expected This cable was not properly selected for The application Bob. Intrigue. 12047

Re: Entry Door Wire Loom

Reply #5 –
Yahoo Message Number: 77887
Dennis,

Talk to the guy in the coach right beside you as he just got a replacement harness from Kevin and can give you the info and show you what to do.
Marc 05 affinity #6429